SOKI 6 and 7 plus solar compact installations

The solar compact installation enables the heat transfer medium to be circulated in the solar circuit between the collector and the cylinder indirect coil. It is equipped with a solar control unit. In conjunction with the SOL SAS cylinder connection set, it can be fitted directly to the SBB .. plus/basic cylinders. Power cables with plug and cylinder sensor are factory-fitted. It is provided with thermal insulation to minimise heat losses. An integral non-return valve prevents an undesirable thermosiphon effect, i.e. the solar cylinder does not lose its heat when the circulation pump is idle. The flow rate can be checked and regulated at any time. A safety valve, dial thermometer for flow and return, shut-off valves for flushing, filling and draining the system, connection for an expansion vessel, and a wall mounting bracket are included.

The most important features

• Up to 16 collectors can be used
• These devices are fully wired
• The SOKI 6 plus is equipped with an integral SOM 6 plus solar control unit
• The SOKI 7 plus is equipped with a SOM 7 plus solar control unit
• Installation on the wall or directly on the cylinder
• Integral cable ducts for wiring
• Attractive design
• Energy saving switching power supply